Extrude Upright Profiles Along Paths with NT UpSweep
NT UpSweep is a free SketchUp upright extrude plugin created by Nice Tower for sweeping vertical profiles along straight, curved and sloped paths. It helps create rails, moldings, curbs and architectural trims while keeping the profile upright throughout the path.
Keep profiles upright while extruding along a SketchUp path
Standard follow-path operations may rotate a profile as the direction changes, producing unwanted twisting. NT UpSweep keeps the selected profile upright while it travels along the guide path. This example shows how the plugin simplifies rails, moldings and architectural profiles that need consistent vertical orientation.
A focused SketchUp path extrusion tool for upright profiles
Rails, curbs, trims and moldings often follow complex paths but must remain vertically aligned. NT UpSweep helps architects and 3D modelers extrude a suitable profile along a guide path without the unwanted rotation common in standard sweep workflows. It is useful for landscape edges, stairs, handrails, cornices and custom architectural details.
Upright orientation
Keep the profile vertically aligned while it follows the selected path.
Curved path support
Extrude along arcs and connected curves for practical design elements.
Sloped workflows
Create profiles along ramps, stairs and changing elevations.
Clean profile control
Start from an organized face that defines the required section.
Architectural uses
Build rails, curbs, trims and moldings with fewer corrections.
Free RBZ installer
Install through SketchUp Extension Manager at no cost.
How to extrude an upright profile along a path
Prepare a clean profile face and a continuous guide path. Confirm the profile position and vertical orientation before starting for a more predictable sweep.
Create the profile
Draw the face that defines the cross-section of the final object.
Select the path
Choose the connected edges that define its route.
Run NT UpSweep
Apply the upright extrusion command to profile and path.
Inspect the result
Check corners, orientation and face direction after the sweep.
Practical ways to use NT UpSweep in SketchUp
Handrails
Create upright rail profiles along stairs, ramps and curved circulation.
Curbs and edges
Model landscape curbs and boundary profiles on changing paths.
Moldings and trims
Sweep decorative sections around architectural walls and details.
Sloped elements
Build continuous profiles that travel across changing elevations.
Install the RBZ in minutes
- Download the NT UpSweep RBZ file.
- Open SketchUp and choose Extensions → Extension Manager.
- Click Install Extension and select the downloaded RBZ.
- Enable the NT UpSweep toolbar from View → Toolbars.
- Restart SketchUp if the toolbar does not appear.
Compatibility and requirements
- Plugin: NT UpSweep
- Version: 1.0.0
- File format: RBZ
- Price: Free
- Best for: Architecture, interiors and 3D modeling
- Recommended setup: A clean profile face and continuous path
NT UpSweep FAQ
Is NT UpSweep free?
Yes. Version 1.0.0 is available as a free RBZ download from Nice Tower.
How is it different from Follow Me?
NT UpSweep is designed to keep the profile upright instead of allowing unwanted rotation along the path.
Can it follow curved paths?
Yes, clean connected curves and sloped paths can be used.
What should I prepare first?
Create a suitable profile face and a continuous guide path.
How do I install it?
Download the RBZ, open Extension Manager and install the NT UpSweep file.
Create upright path extrusions faster
Download NT UpSweep free and model rails, curbs, trims and moldings that remain upright along the selected SketchUp path.